DIY Hombre Leash

Getting bored of your pet's old leash? Try out this DIY hombre leash!

What You'll Need:

• 2 yards of 1/2" cotton rope
• Fabric dye
• Sewing pins
• Measuring tape
• Large binder clip
• Snap hook

Directions:

1. Soak rope in warm water
2. Prepare fabric dye according to instructions
3. Measure and pin rope every 10 inches
4. Attach binder clip to end of rope
5. Dip entire rope in dye, and slowly remove one 10" section at a time
6. Hang by binder clip to dry
7. Attach snap hook

← Previous Post Next Post →